50
Notes
The traction batteries are special chemical
products that need proper use and
maintenance. Routine full charge and slow
discharge are critical to the maintenance
of their performance. In addition, the
traction battery capacity is subject to
natural attenuation due to the chemical
properties. When you find a decrease in
SOC range, it is recommended to check
it at the service center. If the battery
consistency is turned out to be within
the normal range, this decrease is due
to the normal attenuation of the battery
capacity.
Charge Operation and Precautions
Preparations:
1. Turn off the power, pull out the key and
pull up the handbrake.
2. Take out the charging cable from the
trunk and check whether it is in good
condition.
Charging with AC Supply:
1. Open the vehicle charging port.
As shown in the figure, press the right side
of MG logo to make the charging port door
pop open
Open the charging cap, as shown in the figure.
2. Insert the plug into the power socket.
Insert the plug into a 230V (≥16A) grounded
household AC power socket. Please select
a socket with power > 3.6 KW and use it
exclusively for charging.
Driving and Controls
To Next Page
Loading...
