MG Gloster - Front Compartment

198 199
EMERGENCY TROUBLESHOOTING
Before opening the fuse box cover, make sure its surroundings are
dry and no fluid flow from any direction into the opened fuse box,
otherwise the fuse box will be damaged, leading to serious
consequences.
Fuse can be accessed by just removing the cover of front compartment
fuse box. Fuses in the front compartment fuse box can be identified by
the label printed at the back of the fuse box cover.
Type II Type II
Type II
EMERGENCY TROUBLESHOOTING
Fuse Specification Function
FS1 10A KL30 PWR
FS2 25A
Heated rear window/rearview mirror/cargo lamp
FS3 30A IEC power supply 5
FS4 25A Fuel pump
FS5 25A ABS/ESP_valve
FS6 15A Engine control module
FS7 30A Front wiper
FS8 15A SCR relay power
FS9 15A A/C compressor/battery sensor
FS10 30A IEC power supply 3
FS11 25A
Fog lamp/position lamp/daytime running lamp
FS12 25A IEC power supply 8
FS13 25A Low beam
FS14 20A High beam
FS15 30A IEC power supply 2
FS16 30A BCM KL30
FS17 / Reserved
FS18 20A Nitrogen oxygen sensor/PM sensor
FS19 15A WCAC Coolant pump
FS20 15A Engine harness inline supply
FS21 15A Main relay power supply
FS22 20A Horn
FS23 I Reserved
FS24 10A
Rear fog lamp/position lamp/daytime running lamp
FS25 10A
Rearview mirror folding/tailgate/fuel tank cap
Fuse Specification Function
FS26 25A Central lock
FS27 10A
BCM_interior lamp/vanilty/mirror/rain light sensor
FS28 15A Left high beam
FS29 15A Right high beam
FS30 15A Left low beam
FS31 15A Right low beam
FS32 10A Headlamp leveling
FS33 25A Exterior lamps
FS34 15A Washer/rear wiper
JF1 30A Main relay
JF2 50A Electronic parking
JF3 30A Starter
JF4 30A IG power supply
JF5 60A ACC power supply
JF6 40A IEC power supply 9
JF7 40A DC stabilizer 2
JF8 40A ABS/ESP motor
JF9 40A Front blower
JF10 40A Rear blower
JF11 60A IEC power supply 1
JF12 60A IEC power supply 6
MID1 100A Cooling fan
PR1 I PTC1 relay
PR2 I PTC2 relay
R1 I SCR relay
R2 I PTC3 relay
R3 I Horn relay
R4 I Starter relay