SPARE PARTS
Use only original
MGF
MGF spare parts.
To order spare parts, it is necessary to specify the machine code shown on the plate and the spare code deductible from the
exploded view attached to this manual.
Dismantling
Dismantling
WASTE DISPOSAL
Installation and work waste must be collected according to homogeneous categories and disposed of according to current
legislation.
The fluids deriving from the washing must be disposed of according to their nature, the chemical substances used and the
regulations in force.
The machine must be disposed of as special electrical waste, by conferment at a specialized collection center. The disposal
fee has already been paid if requested.
COMMISSIONING AND DISMANTLING
Before permanently putting the system out of service, empty Twister from any chemical product and arrange to deliver it to
an authorized waste disposal center for free collection.
Conformity Declaration
Conformity Declaration
MGF
MGF srl Via Chico Mendes, 8 – 43055 Mezzani (PARMA) – ITALY declares that test pump (art. 905200 and art. 905250)
responds to following directives: 2006/42/CE, 89/392/CE, 91/368/CE, 93/44/CE, 93/68/CE, 73/23/CE, 93/68/CE, 89/336/CE,
91/263/CE, 92/31/CE, 93/68/CE, EN-292.2, EN-60.335.1, EN-60.335.2.79.
The machine is also compliant to REACH and WEEE European Community Regulations.
11
MGF
MGF
srl –– Via Chico Mendes, 8 – 43055 Mezzani (PR) ITALY – Tel. +39 0521-818301 – Fax +39 0521-818202
E-mail:info@mgftools.com
– Web: www.mgftools.com – www.nebulizzare.com
To Next Page
Loading...