MGI ZIP Navigator Installation

SEAT, SAND BUCKET LOOP, SAND BOTTLE INSTALLATION
The seat for your MGI Zip Buggy is designed to be installed on the Right hand side of your buggy.
Once installed, your horizontal seat stem should look like the below image.
1. To insert the horizontal seat stem ensure the coloured leaver underneath the chassis is
unlocked as per the below image
2. Insert the seat stem through the chassis so that the end of bracket is positioned
approximately to the centre of the right hand wheel.

MGI ZIP Navigator Specifications

General

Motor	230W
Warranty	2 years
Range	36 holes
Foldable	Yes
Features	USB charging port
Display	LCD
Distance Control	Yes
Wheels	3
Charging Time	4-5 hours
Max Speed	Variable speed control