MGI ZIP series User Manual (English)

To Next Page

SEAT, SAND BUCKET LOOP, SAND BOTTLE INSTALLATION

The seat for your MGI Zip Buggy is designed to be installed on the Right hand side of your buggy.

Once installed, your horizontal seat stem should look like the below image.

1. To insert the horizontal seat stem ensure the coloured leaver underneath the chassis is

unlocked as per the below image

2. Insert the seat stem through the chassis so that the end of bracket is positioned

approximately to the centre of the right hand wheel.

Other manuals for MGI ZIP series

Need help?

Do you have a question about the MGI ZIP series and is the answer not in the manual?

General