Mhouse GD10 - User Manual

Installation instructions and warnings
English
IST GD10-GB 4865 Rev. 00 del 29-03-2005
MhouseKit GD1 - GD10
For the automation of a sectional or up-and-over door.

Summary

1 Warnings

2 Product Description

2.3.1 GD1 K and GD10 K Electromechanical Gearmotor

Details the gearmotors, their features, and electrical connections.

2.3.5 TX4 Radio Transmitter

3 Installation

3.1 Preliminary Checks

3.2 Preparing the Electrical System

Guides on preparing electrical wiring and conduits for the system.

3.2.1 Connection to the Electrical Mains

Instructions for connecting the system to the main electrical power supply.

3.3 Installation of the Various Devices

Step-by-step installation procedures for system components.

3.3.1 Assembly of the Guide Supplied with GD1

3.3.2 Assembly of the Guide Supplied with GD10

3.3.3 Fixing of the Gearmotor to the Guide

3.3.4 Fixing of the Gearmotor to the Ceiling

3.3.8 Electrical Connections to the Control Unit

Detailed guide for making electrical connections to the control unit.

3.4 Power Supply Connection

Guidance on connecting the GD control unit to the mains power.

3.5 Initial Checks

Verifying system operation after installation.

3.5.1 Recognition of Connected Devices

3.5.2 Learning of the Doors Open and Closed Positions

Steps to teach the system the door's open and closed travel limits.

3.5.3 Testing the Radio Transmitter

3.7 Testing and Commissioning

Final verification and setup for operation.

3.7.1 Testing

Procedure for testing all system functions for safety and reliability.

3.7.2 Commissioning

Steps for final commissioning of the automation system.

5 Additional Information

5.1 Advanced Adjustments

5.1.1 Adjusting the Parameters with the Radio Transmitter

How to configure system parameters using the radio transmitter.

5.1.2 Checking the Adjustments with the Radio Transmitter

5.3 Adding or Removing Devices

5.3.3 Recognition of Other Devices

5.4 Memorization of Radio Transmitters

Pairing transmitters with the control unit.

5.4.1 Memorization Mode 1

Steps to memorize a radio transmitter in Mode 1.

5.4.2 Memorization Mode 2

Steps to memorize a radio transmitter in Mode 2.

5.4.3 Remote Memorization

5.5 Troubleshooting

Table of common problems and their solutions.

5.6 Diagnostics and Signals

Monitoring system status and identifying issues.

5.6.1 Photocells

5.6.2 Flashing and Courtesy Lights

5.6.3 Control Unit

7 Annexes

7.3 Annexe 3: Operating Guide

7.3.1 Safety Regulations

Essential safety rules for users of the automation system.

7.3.2 Door Control

7.3.3 Maintenance Operations to Be Performed by the User

Mhouse GD10 Specifications

General

Brand	Mhouse
Model	GD10
Category	Garage Door Opener
Language	English