Need help?Do you have a question about the MHS Boilers ADI LT and is the answer not in the manual?
Overview of the ADI LT boiler's purpose and features.
Guidelines and standards for boiler installation and maintenance.
Details on EEC approvals and certifications for ADI LT boilers.
Identification and description of the boiler's main components.
Technical drawings and dimensions for ADI LT boiler models.
Technical specifications for ADI LT models 105-400.
Technical specifications for ADI LT models 475-950.
Description and features of the boiler's heat exchanger.
Explanation of power modulation and combustion system.
Details on the air-gas premix system and connections.
Information about the air inlet filter.
Description of the air-gas premix burner.
Details on the ignition and ionization kit.
Explanation of the Siemens control panel and its buttons.
Description of the control panel display and its symbols.
Explanation of the standard or initial display screen.
Procedure for adjusting boiler flow temperature.
Explanation of boiler lockout codes and how to view them.
Procedure for accessing boiler maintenance functions.
List of adjustable parameters for the final user.
Overview of available information at different user levels.
Information available at the user level.
Information available at maintenance level 1.
Information available at maintenance level 2.
Information available at maintenance level 3.
Codes for different boiler operation phases.
Explanation of error codes shown on the display.
Details on the optional outside temperature function.
Visual overview of the boiler control unit.
Simple sequence regulation for multiple boilers.
Using 0-10V signals for external boiler control.
Optimizing combined operation of multiple boilers.
Electric drawings and legend for the boiler.
Electric diagram for ADI LT 105 to 200 models.
Electric diagram for ADI LT 250 to 325 models.
Electric diagram for ADI LT 400 to 750 models.
Description of safety features and their activation.
Location and purpose of the boiler identification label.
Considerations for boiler heat output sizing.
Procedures for lifting and transporting boilers.
Requirements for the boiler room installation.
Requirements and considerations for gas supply.
Handling gas pressure above 45 mbar.
Explanation of water condensing in the boiler.
Treatment process for condensed products.
Requirements for condensed product evacuation piping.
Considerations for the boiler chimney.
Factors and data for chimney sizing calculations.
Installation of flue draught stabilizers and dampers.
Considerations for existing chimney installations.
Important data and considerations for hydraulic installation.
Requirements for overpressure safety valves.
Information on hydraulic pressure drop.
Details on water manifold installation and sizing.
Requirements for water quality and treatment.
System drawings for heating and DHWS.
Essential checks and required instruments for start-up.
Explanation of the control unit and operating cycle.
Procedure for gas and air adjustments.
Step-by-step guide for combustion adjustment.
Procedure for changing between propane and natural gas.
General overview of maintenance operations.
Steps to dismantle the burner for maintenance.
Location of probes and sensors for maintenance.
Data sheet for recording combustion parameters.
Details of the boiler guarantee terms.
Comprehensive list of error codes.
General| Brand | MHS Boilers |
|---|---|
| Model | ADI LT |
| Category | Boiler |
| Language | English |
To Next Page