To Next PageTo Next Page
Need help?Do you have a question about the Mi AIoT AX3600 and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Frequency Bands | 2.4GHz, 5GHz |
| Maximum Speed | 2976 Mbps (574 Mbps on 2.4GHz + 2402 Mbps on 5GHz) |
| RAM | 512MB |
| ROM | 256MB |
| Dimensions | 410 x 177 x 134 mm |
| Processor | Qualcomm IPQ8071A |
| Security | WPA3 |
| Features | MU-MIMO, OFDMA, Beamforming, AIoT |
| Antennas | 7 external antennas (1 AIoT antenna, 6 high-performance antennas) |
| Ports | 1 x WAN (Gigabit), 3 x LAN (Gigabit) |
Connect the WAN port of the router to the DSL/Cable/satellite modem or wall Ethernet port.
Connect your device to the router's Wi-Fi using the name on the product label.
Access the landing page via browser or auto-redirect to configure internet connection.
Input your broadband account name and password provided by your internet service provider.
Configure your Wi-Fi network name and password, and optionally set an administrator password.
Scan QR codes to download the Mi WiFi app and the Mi Home/Xiaomi Home app.
Connect your smartphone to the router's Wi-Fi and add the router via the Mi WiFi app.
Connect smart devices and add them through the Mi Home app after detection by the router.
Troubleshoot common problems when the Mi Home app fails to detect smart home devices.
Steps to troubleshoot and resolve internet connectivity problems after setup.
Guidance on recovering or resetting the router's administrator password.
Instructions on how to perform a factory reset on the router.
Explanation of the colors and states of network and system status indicators.
Details on the AloT status and network port indicator lights.
