Mi MJSXJ05CM - Product Instructions; Turning the Device On; Indicator Light Status; Installing a MicroSD Card

03
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
Product Instructions
○ Turning the Device On
The Mi Home Security Camera will automatically activate once the power cable is inserted
into the Micro-USB charging port.
reset
If the indicator light is flashing orange, that means the device is activated successfully.
Ifyoudo not see a flashing orange light, please press and hold the Reset buon to restart
thedevice to enter pairing mode.
Once the Mi Home Security Camera is turned on, please do not aempt to rotate its head
byforce. If the camera position is incorrect, adjustments can be made through the app.
○ Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
○ Installing a MicroSD Card
Make sure that the power to the security camera is already disconnected.
Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD
card into the slot (the side with contact points must be facing down).
Note: Please unplug the security camera before inserting or removing the Micro SD card.
Please use a genuine Micro SD card manufactured by a qualified supplier, with a reading/
writing speed of no less than U1/Class 10. (Maximum support capacity is 64 GB)