3
Power
Connect the supply plug to a suitable 220-240V AC 50Hz power outlet and switch on. This appliance operates safely across Australasia. It is predominately an extra low voltage (12V) appliance and is relatively
inexpensive to operate.
Setting the Temperature
When first connected, after a brief period the digital door display will show the interior temperature measurement of each zone and you will hear a beeping sound. To set the desired temperature for each zone, use the
UP/DOWN buttons on the display to set the desired temperatures in each compartment.
Once selected, the display will return to the current temperature inside the cooler. When the selected temperature is reached the unit will maintain that temperature as a steady state.
The right hand set of buttons controls the lower zone and has a range of 11°C-18°C.
The left hand set of buttons controls the upper zone and has a range of 7°C-18°C.
Temperature Stability
Note! The digital display is a whole number so that it may fluctuate between 2 numbers depending on the surrounding ambient temperature stability, for example if the temperature internally is 7.5°C it may read 8°C or
7°C for a time.
Note! The ambient temperature has an effect on the ability to cool. If the appliance is placed in a room with large variations or high temperatures this will affect the operation. Always place the unit in a cool stable
environment.
Warning! Do not enclose this appliance in cabinetry. The appliance may not cool properly. This appliance is designed to be free standing only.
Moisture
High build-up of moisture on the interior or exterior is not unusual during periods of high humidity. Simply wipe moisture and also minimise the times that the door is opened. Do not leave the door open longer than is
necessary.
Internal Lighting
Press to turn the interior lamps on or off
To Next Page
Loading...