2
Thermoelectric Cooling
The cooling system, also called the Peltier Effect, is a solid safe method of heat transfer through dissimilar semiconductor materials. During operation direct current is passed through the semiconductor module which
causes heat to be transferred from the inside of the appliance to the outside. This system is more efficient and environmentally friendly than conventional compressor gas driven refrigeration.
Features
70 litre capacity
21 bottle capacity (maximum)
Dual cooling zones – 7°C-18°C Upper zone, 11°C-18°C Lower Zone
Max cooling range of 18°C below ambient
Thermoelectric cooling (no compressor)
Auto defrost
Soft interior lighting
Full glass door
No refrigerant, environment friendly
Operation Guide
Carefully read this manual in full before using this appliance, particularly the safety instructions.
Wipe the interior with a warm damp cloth to remove any impurities that may have accumulated. Ensure the shelves are correctly installed.
Installation and Position
Place the appliance in a suitable area away from direct sunlight and other heat sources. This appliance operates relative to the ambient temperature around it. For best results install in a cool area away from other heat
sources. If the ambient temperature around the unit is too high it will affect its efficiency. Also if the ambient temperature is too low it will also affect its operation. This appliance operates most effectively between 10°C -
25°C however it will also work in temperatures as low as 5°C. Temperatures outside these minimum and maximum ranges will affect the operation of the appliance. It is not recommended to use this appliance outside
of these temperature levels. An ideal ambient would be 18-20°C. Switch the appliance off if the temperature levels are constantly outside these levels.
WARNING! DO NOT COVER THE APPLIANCE
WARNING! DO NOT BUILD THE APPLIANCE INTO CABINETRY
To Next Page
Loading...