soniclear | 17
• Medium – (Top red light blinking) This setting is intended for all skin types
and provides normal sonic cleansing with stimulating massage for
increased skin rejuvenating benets.
• High – (Both red lights blinking) This setting is intended for all skin types
except sensitive and provides maximum sonic body cleansing with
stimulating massage for increased skin rejuvenating benets.
8. Cleansing Timer. For even and thorough cleansing, soniclear features
a built in automatic timer that beeps every 20 seconds to indicate it is time to
move to another cleansing area.
9. Cleansing. To cleanse, wet your skin and the Brush Head with warm water.
Apply cleanser to your skin or the Brush Head. Turn the soniclear on
and select the desired speed
and operating mode. Place the Brush Head
ush to the skin and gently move in small circular motions. Note: Do not press
hard. The sonic micro- massaging action of the Brush Head will perform the
cleansing at up to18,000 oscillation movements per minute. Pressing too hard
will impede the motion and reduce the effectiveness of the cleansing.
10. Stopping. soniclear can be stopped at any time by pressing and holding
the ON/OFF Button
for approximately 1 second.
11. When nished, rinse with warm water and dry skin with a clean towel.
12. Wash your brush in warm soapy water and rinse any residue from your
soniclear handle.