Need help?Do you have a question about the Michel's R200 and is the answer not in the manual?
General| Brand | Michel's |
|---|---|
| Model | R200 |
| Category | Remote Control |
| Language | English |
Overview of the R200 remote's buttons, functions, and indicators.
Details compliance with FCC Rules and contains FCC/IC IDs.
Procedure for pairing Tarps, Chute Openers, and Augers to the remote.
Step-by-step guide for pairing an EZ Opener to the remote.
Pairing a combined ConveyHawk and EZ Opener system.
Detailed steps to pair a T200 Tarp Receiver.
Detailed steps to pair a T210 Tarp Receiver.
Instructions for pairing A200 and A210 Auger/Conveyor receivers.
Steps to pair an A200 Auger receiver.
Steps to pair an A210 Auger or Conveyor system.
Steps to pair an S210 Swing Auger receiver.
Adjusts the automatic shutdown timer of the remote.
Modifies the remote's network identification for connectivity.
Organizes multiple trailers for easy selection on the remote.
Initial step to teach all trailer units to the remote for grouping.
Navigates to the menu for creating, editing, and selecting groups.
Procedure to create a new group by assigning paired units.
Enables choosing a specific group to display its associated units.
Renames an existing group for better identification.
Modifies a group by adding or removing units.
Finds the hardware and firmware version of the remote.
Accesses and controls tarp functions like open/close.
Instructions for opening and closing the tarp using the remote.
Allows editing tarp description, motor direction, and removing units.
Procedure to unpair a tarp receiver from the remote.
Corrects backwards operation of tarp open/close buttons.
Customizes the displayed name for a tarp receiver.
Finds the hardware and firmware version for a tarp receiver.
Accesses and controls chute opener functions like open/close.
Instructions for operating the EZ Opener chute.
Allows setting limits, changing name, and finding version.
Crucial step to set open/close limits for proper chute operation.
Troubleshooting guide for incorrect chute positioning during installation.
Customizes the displayed name for a chute opener.
Procedure to unpair an EZ Opener Chute from the remote.
Configures the optional indicator light for chute status.
Allows the chute to stop automatically at a user-defined percentage.
Finds the hardware and firmware version for the chute opener.
Instructions for operating the MIC210 Side Chute.
Allows editing name, removing, and finding version for MIC210 chute.
Procedure to unpair a MIC210 Side Chute receiver.
Corrects backwards operation of MIC210 Side Chute buttons.
Customizes the displayed name for a MIC210 Side Chute.
Finds the hardware and firmware version for the MIC210 Side Chute.
Accesses and controls auger system functions like on/off.
Instructions for turning augers or ConveyHawk systems on/off.
Detailed steps for operating auger systems.
Instructions for operating a ConveyHawk conveyor system.
Allows programming, editing, and finding version for auger systems.
Procedure to unpair an auger/conveyor system from the remote.
Sets up the remote for conveyor or 2/3 auger systems.
Adjusts settings for combined ConveyHawk and EZ Opener units.
Customizes the displayed name for an auger system.
Finds the hardware and firmware version for an auger system.
Accesses and manages auxiliary systems like light kits.
Procedure to pair a light kit controller to the remote.
Sets up a dedicated screen for operating light kits.
Assigns a paired light kit to a specific lights screen.
Instructions for controlling lights via the designated lights screen.
Operates, modifies, or removes individual lights within a kit.
Links a chute opener's light to a remote screen for control.
Operates up to four lights or units from a single screen.
Uses the T210 remote's 'Lights' button to control trailer lights.
Instructions for operating the swing auger using the remote.
Allows editing name, direction, and finding version for swing augers.
Procedure to unpair a swing auger receiver from the remote.
Corrects backwards operation of swing auger IN/OUT buttons.
Customizes the displayed name for a swing auger.
Finds the hardware and firmware version for a swing auger.
Controls Tarp, Chute Gate Opener, and Hoist on grain truck.
Operates the tarp on a grain truck, similar to trailer tarps.
Accesses and controls the chute gate opener on the grain truck.
Instructions for opening and closing the chute gate opener.
Allows editing name, direction, and finding version for chute gate opener.
Procedure to unpair a chute gate opener receiver.
Corrects backwards operation of chute gate opener buttons.
Customizes the displayed name for a chute gate opener.
Finds the hardware and firmware version for the chute gate opener.
Accesses and controls the hoist for grain truck box movement.
Instructions for moving the grain truck box up or down.
Allows editing name, direction, and finding version for hoist.
Procedure to unpair a hoist control box receiver.
Corrects backwards operation of hoist UP/DOWN buttons.
Customizes the displayed name for a hoist.
Finds the hardware and firmware version for the hoist.
To Next Page