EasyManua.ls Logo

Michelin MPX 1900 - User Manual

Michelin MPX 1900
32 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MPX 1900
MPX 1900
réf. 91245- BV
Guide d'utilisation du nettoyeur à
haute pression
MPX1900_fr.indd 1 22/02/10 08:53

Questions and Answers

  • M
    Mark StewartAug 11, 2025
    Why is my Michelin Pressure Washer pump not reaching working pressure?
    • D
      Dr. Peter Edwards Jr.Aug 11, 2025
      There are several reasons why your Michelin Pressure Washer pump might not be reaching the correct working pressure: * The nozzle may be worn and needs replacing. * The water filter could be dirty and requires cleaning. * The water supply pressure might be too low; ensure the water supply tap is fully open. * Air could be getting sucked into the system; check the tightness of all hose fittings. * There may be air in the pump; switch off the appliance, repeatedly depress and release the gun trigger until the water flows steadily, then switch the appliance back on. * The adjustable nozzle may not be positioned correctly.
  • A
    Amy RuizAug 18, 2025
    What to do if the pressure drops during use of my Michelin MPX 1900 Pressure Washer?
    • T
      tracy78Aug 18, 2025
      If you experience pressure drops while using your Michelin Pressure Washer, consider the following: * If you are using an external tank for water intake, connect the appliance to the mains water supply instead. * If the intake water is too hot, reduce the temperature. * The nozzle may be clogged and needs cleaning. * The filter may be clogged and needs cleaning.
  • W
    Walter GarciaAug 25, 2025
    How to troubleshoot a Michelin MPX 1900 when the motor fails to start?
    • S
      Shawn WilliamsAug 25, 2025
      If the motor on your Michelin Pressure Washer fails to start, check the following: * Ensure the unit has electrical power by verifying the plug is firmly in the socket and that the mains voltage supply is present.
  • L
    Laura ThompsonAug 29, 2025
    Why does my Michelin MPX 1900 motor sound but fail to start?
    • S
      Sherry FisherAug 30, 2025
      If your Michelin Pressure Washer motor makes a sound but doesn't start, it could be due to: * Insufficient power supply. Check that the voltage of the mains power supply line matches what is indicated on the appliance plate. * Voltage loss from using an extension cable. Verify the extension cable's characteristics.
  • J
    johnsaundersSep 4, 2025
    What to do if my Michelin MPX 1900 motor starts even when the gun trigger is released?
    • S
      Susan MartinezSep 4, 2025
      If your Michelin Pressure Washer's motor starts even when the gun trigger is released, it might be because the nozzle is clogged. Try cleaning the nozzle.

Michelin MPX 1900 Specifications

General IconGeneral
Maximum Pressure160 bar
Hose Length8 m
Power SourceElectric
Flow Rate550 l/h
Water Flow550 l/h

Related product manuals