10
TORQUE STANDARDS
Each torque wrench is calibrated at the factory
using torque standards according to DIN ISO 6789
& ASME B107.14M-1994, and certies it meeets
the accuracy requirements of specications DIN
ISO 6789 and ASME B107.14M-1994.
Customer enquiries :
Tel : 00 49 1806 841 090
Email : service@matrix-direct.net
MICHELIN and/or the Michelin Man Device and/or
BIBENDUM are trademark(s) owned by, and used with the
permission of, the Michelin Group.
© 2011 Michelin. www.michelin.com
Distributed under licence by:
MATRIX GmbH Germany
Mautanger 1
D-85296 Rohrbach
Germany
www.matrix-direct.net
To Next Page
Loading...
