MICHELIN
®
RV Tires 15
MICHELIN
®
XZA
®
1
Even-wearing, all-position tire optimized for heavy axle loads
in highway and limited regional service
(1)
• Miniature sipes in groove walls and variable groove angles help reduce irregular
wear and improve overall performance
• Full-width elastic protector ply helps protect the working plies from bruising and
penetrations
• Flat crown radius helps enhance wear and treadlife
(1) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
(2) For use with 8.25 x 22.5 wheels, see Page 20.
When mounting the 315/80R22.5 LRL on an 8.25" wheel, do not load or inflate to the maximum load or inflation
pressure indicated on the sidewall. The maximum load per tire for the 315/80R22.5 LRL, single mount on an 8.25" wheel, is 8000 lbs at 120 PSI (3630 kg at 830 kPa).
Size
Load
Range
Catalog
Number
Tread
Depth
Max.
Speed
(
*
)
Loaded
Radius
Overall
Diameter
Overall Width
(‡)
Approved
Wheels
(Measuring wheel
listed first.
)
Min. Dual
Spacing (‡)
Revs
Per
Mile
Max. Load and Pressure
Single
Max. Load and Pressure
Dual
32nds mph in. mm in. mm in. mm in mm lbs. psi kg. kPa lbs. psi kg. kPa
315/80R22.5 L 47056 18 75 19.6 499 42.5 1079 12.5 317 9.00, 8.25
(2)
13.8 351 489 9090 130 4125 900 8270 130 3750 900
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
®
tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any
time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
LINE HAUL APPLICATIONS
MICHELIN
®
XZA2
®
ENERGY
Fuel-efficient
(3)
, all-position radial designed for
long life in highway steer axle service
(6)
• Unique intermediate rib design helps combat the onset
of irregular wear in highway service
• Exceptional handling and responsiveness through optimized
shoulder design
• Traction and lateral control offered by miniature sipes
and variable groove angles
12
- 295/60R22.5
(1, 2) Tread design as indicated above the tire picture.
(3) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(4) For further instructions on proper usage of the 295/60R22.5, see Page 21.
(5) For use with 8.25 x 22.5 wheels, see Page 20.
When mounting the 315/80R22.5 LRL on an 8.25" wheel, do not load or inflate to the maximum load or inflation
pressure indicated on the sidewall. The maximum load per tire for the 315/80R22.5 LRL, single mount on an 8.25" wheel, is 8000 lbs at 120 PSI (3630 kg at 830 kPa).
(6) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
Size
Load
Range
Catalog
Number
Tread
Depth
Max.
Speed
(
*
)
Loaded
Radius
Overall
Diameter
Overall Width
(‡)
Approved
Wheels
(Measuring wheel
listed first.
)
Min. Dual
Spacing (‡)
Revs
Per
Mile
Max. Load and Pressure
Single
Max. Load and Pressure
Dual
32nds mph in. mm in. mm in. mm in mm lbs. psi kg. kPa lbs. psi kg. kPa
275/70R22.5
(1)
J 90059 18 75 17.6 448 38.0 966 10.9 277 7.50, 8.25 11.9 303 545 6940 130 3150 900 6395 120 2900 830
295/60R22.5
(2)
J 33215 16 65 16.7 424 36.1 918 11.4 290 9.00
(4)
13.0 329 575 7390 130 3350 900 6780 130 3075 900
295/80R22.5
(1)
H 76807 16 75 19.1 486 41.3 1048 11.8 299 9.00, 8.25 13.2 335 503 7830 120 3550 830 6940 120 3150 830
315/80R22.5
(1)
L 76184 17 75 19.5 496 42.3 1074 12.5 318 9.00, 8.25
(5)
13.8 351 492 9090 130 4125 900 8270 130 3750 900
LINE HAUL APPLICATIONS
To Next Page
Loading...