Need help?Do you have a question about the Michigan Welding MIG135 and is the answer not in the manual?
General| Welding Type | MIG |
|---|---|
| Amperage Range | 30-135A |
| Wire Diameter | 0.023-0.035 inches |
| Duty Cycle | 20% @ 90A |
| Spool Size Capacity | 4 inch |
Keep the welding environment free from flammable materials and ensure adequate ventilation.
Key safety points and precautions for operating welding equipment.
Steps for assembling the welding machine, including handle and wire spool.
Identification of controls and indicators on the MIG135 and MIG180 control panels.
Details on voltage settings and corresponding welding currents.
Detailed steps for initiating and performing a weld.
Table of common problems, explanations, and solutions.
To Next Page
