Micro Matic PREMIUMPLUS - Mount and tighten bonnet, adjust pressure

7
Micro Matic A/S | Holkebjergvej 48 | DK-5250 Odense SV | Tel.: +45 66 17 11 22 | www.micro-matic.com
Mounting of PremiumPLUS
Mount the bonnet by hand, to make sure
the thread has the correct alignment.
Tighten the bonnet by using the tool [5].
and a torque wrench (tightening torque
30 Nm).
Adjust the work-pressure and mount the
new lid [1].
Fig. 13
Fig. 14
Fig. 15
PremiumPLUS