Need help?Do you have a question about the Micro Motion CMF300 and is the answer not in the manual?
Introduces the Micro Motion ELITE sensor and its system role.
Details on various sensor models (CMF010, CMF400, etc.) and their parts.
Explains sensor connection options (integral, 9-wire) for transmitters.
Guidelines for selecting the proper sensor location in the pipeline.
How to orient the sensor for optimal performance and installation.
Procedures for physically mounting the sensor in the pipeline.
Instructions for connecting the sensor to the transmitter.
Requirements and procedures for starting up the installed flowmeter.
Overview of troubleshooting resources and common issues.
Details on diagnosing zero drift, erratic flow, and density readings.
Procedures for diagnosing problems directly at the sensor.
Procedures for diagnosing problems via the transmitter.
Information on the use and maintenance of purge fittings.
Details regarding rupture disks and their function.
Guidance on maintaining and replacing product safety labels.
Procedures and requirements for returning equipment.
Introduces the Micro Motion ELITE sensor and its system role.
Details on various sensor models (CMF010, CMF400, etc.) and their parts.
Explains sensor connection options (integral, 9-wire) for transmitters.
Guidelines for selecting the proper sensor location in the pipeline.
How to orient the sensor for optimal performance and installation.
Procedures for physically mounting the sensor in the pipeline.
Instructions for connecting the sensor to the transmitter.
Requirements and procedures for starting up the installed flowmeter.
Overview of troubleshooting resources and common issues.
Details on diagnosing zero drift, erratic flow, and density readings.
Procedures for diagnosing problems directly at the sensor.
Procedures for diagnosing problems via the transmitter.
Information on the use and maintenance of purge fittings.
Details regarding rupture disks and their function.
Guidance on maintaining and replacing product safety labels.
Procedures and requirements for returning equipment.
General| Model | CMF300 |
|---|---|
| Category | Coriolis Flow Meter |
| Measurement Type | Mass Flow, Density, Temperature |
| Flow Tube Material | 316L Stainless Steel |
| Communication Protocols | HART, Modbus |
| Power Supply | 24 VDC |
| Enclosure Rating | IP67 |
| Process Connection | Flanged, Threaded |
| Accuracy | ±0.1% of rate |
| Pressure Rating | Up to 100 bar |
| Output Signals | 4-20 mA, Pulse |
To Next Page