POWER
NOTES:
• To turn the device OFF, either the
USB or the battery must be
removed. Otherwise the device
will power from one or the other
depending upon the switch
position. When either power
source is disconnected, the
corresponding switch position =
OFF
• It is OK to run the battery until it is
completely drained, but it should
then be recharged immediately or
as soon as possible.
• You may remove the battery or the
USB power at any time without
damaging the device.
• If the device loses power, when
power is restored it will begin with
the last setting for intensity and
protocol that was set by the user.
USB Mini-B port Power switch:
Power
from USB
Power from
battery
COPYRIGHT © 2017 Micro-Pulse LLC All Rights Reserved Worldwide
To Next Page
Loading...