Micro Rain MR43 - Instructions For Booster Pump; Booster Pump Engine Fueling; Booster Pump Operation Without Water; Connect Water Supply to Machine

19
These instructions are to be followed after the hose and gun cart have been pulled to the desired
location.
DO NOT USE THE
PUMP WITHOUT
WATER
Please see engine check list using the enclosed engine owners manual. Follow engine procedures
as instructed by the engine manufacturer to avoid pump or machine damage. Micro Rain or Micro
Rain Dealers are not responsible nor liable for operator failure to follow engine and machine
instructions and guidelines.
1. Remove the gas cap and ll the gas tank to the side of the engine
with gasoline and replace the cap. Do not over-tighten gas cap.
Check gas level often to be sure engine has fuel.
2. Never use the tank placed on the engine for any reason. DO NOT
FILL WITH FUEL.
3. Connect the water supply hose to the quick connect tting on the
machine.
4. If your machine has a shut-off valve, make sure the valve handle is
in the working (up) position.
Turn on the water source and pressure to the machine.