Micro CRUISER - Handlebar Assembly (General Models)

asseMbly InstructIons
26
MICRO FLEX | FLEX AIR | FLEX 200 | SUSPENSION | Monster BULLET | SPEED+ | ROCKET | WHITE | BLACK
Unfolding:
1. Open the clamp
1
.
2. Push the button
4
and unfold the steering column until the locking mechanism audibly clicks
into place (see Fig. F).
3. Then tighten the clamp again and ensure that there is sufficient tension. If there is not enough
tension on the clamp, you can increase the tension by tightening the knurled screw. To do this,
unfold the clamp, tighten the knurled screw and then close the clamp again.
Folding:
1. Open the clamp
1
.
2. Press the buttons
4
and
5
at the same time and fold the steering column together (see Fig. G).
MICRO EAZY
− Unfolding: Unfold the steering column upwards unl the steering column lock is fully locked
into place and the steering column can no longer be moved (see Fig. H). While doing so, push
the steering column forward slightly.
− Folding: Stand with your right foot laterally on the scooter deck while stepping on the steering
column lock
6
with your le foot and pushing the steering column forward slightly (see Fig. I).
This unlocks the folding mechanism and the steering column will automacally fold together
due to the spring tension.