Micro CRUISER - Assembly Instructions; Steering Column Folding and Unfolding

asseMbly InstructIons
25
EN
Assembly instructions
Unfolding and folding the steering column
MICRO Light
1. Open the clamp
1
(see Fig. A).
2. Pull the folding handle
2
forward until the clamp locks securely into place in the forward
position (see Fig B.).
3. Tighten the clamp again and ensure that there is sufficient tension (see Fig. C). If there is not
enough tension on the clamp, you can increase the tension by tightening the knurled screw
3
.
To do this, unfold the clamp, tighten the knurled screw and then close the clamp again.
MICRO BULLET | SPRITE | FLEX | Monster BULLET | CRUISER
1. Open the clamp
1
(see Fig. D).
2. Push the button
4
and unfold the steering column until the locking mechanism audibly clicks
into place (see Fig. E).
3. Then tighten the clamp again and ensure that there is sufficient tension. If there is not enough
tension on the clamp, you can increase the tension by tightening the knurled screw
3
. To do
this, unfold the clamp, tighten the knurled screw and then close the clamp again.