Instruments must be cleaned within 30 minutes of
end use to minimize organic material drying.
• Only pH neutral cleaning agents are acceptable
for cleaning your PAL Handpiece and cables. High
pH cleaners will damage the finish, encourage
corrosion, and result in more frequent equipment
maintenance.
• DO NOT utilize cleaning agents with chlorine or
chloride as the active ingredient is corrosive to
stainless steel.
• DO NOT lubricate or oil the PAL Handpiece.
Lubrication may damage the internal motor
mechanism. Also take special precautions to avoid
the use of cleaners that contain lubricants.
Cleaning
For more information, please reference PAL System Instruction for Use (IFU) “IM-PAL-650” and “IM-5025”
LIT-PAL-CS Rev. A 12
To Next Page
Loading...
