To Next PageTo Next PageWhy is my Microdigital MDR-i0016(25/36) not recording video?
Your Microdigital MDR-i0016(25/36) DVR may not be recording video because it lacks a disk assigned as storage space. To resolve this, check the [Setup] – [Storage] menu to ensure a disk is properly assigned.
What to do if Microdigital MDR-i0016(25/36) DVR boots up but does not proceed?
If your Microdigital DVR boots but fails to proceed, try recycling the power. If the issue persists, it could be due to a bad system disk drive, and you should contact the agent you purchased this product from to replace the system disk drive.
How to fix Microdigital DVR if it does not display on the attached monitor?
If your Microdigital DVR isn't displaying on the monitor, first confirm that the monitor is properly connected to the VGA port on the MDR- i0016(25/36). Also, ensure that the monitor supports a resolution of 1024x768 or higher.
General| Brand | Microdigital |
|---|---|
| Model | MDR-i0016(25/36) |
| Category | DVR |
| Language | English |
Basic introduction to the Microdigital MDR-i0016(25/36) NVR device.
Lists the key capabilities and functionalities of the NVR system.
Details the recording performance based on codec and resolution.
Lists all physical items included in the product package.
Describes the components and indicators on the front panel.
Describes the connectors and ports on the rear panel.
Illustrates the overall system architecture and connections.
Provides a step-by-step guide for initial installation and powering on the device.
Overview of the device's primary user interface and its functions.
Launches the main setup program for device configuration.
Opens a pop-up window to view live video of a selected channel.
Opens a pop-up window for single channel video playback.
Describes the on-screen virtual keyboard functionality.
Details how to control the device's speaker volume.
Shows the current login status of users on the system.
Options for restarting or shutting down the NVR device.
Displays the current system date and time settings.
Provides status on live video feeds and recording operations.
Connects external video sources like cameras and servers to the NVR.
Step-by-step instructions for manually adding camera devices.
Guides on using the auto-recognition feature for camera setup.
Configures recording settings like mode, frame rate, and resolution.
Describes how to create and define new recording modes.
Allows users to schedule weekly recording activities.
Configures storage options such as DAS, NAS, and SAN.
Details the process for setting up internal hard drive storage.
Configures the device's date, time, and time zone settings.
Manually sets the device's current date and time.
Selects the correct time zone for the device's location.
Synchronizes device time with an external NTP server.
Manages the device's network settings and IP configuration.
Procedures for changing the device's IP address.
Configures Dynamic DNS settings for remote access.
Details how to modify network port numbers for services.
Guides on how to change the administrator password securely.
Manages user accounts for remote access and permissions.
Adjusts various system management and availability options.
Configures the main screen display mode (Live Video or Text).
Enables the watchdog feature for system monitoring and rebooting.
Configures the system for automatic periodic restarts.
Enables automatic recovery for network camera connections.
Provides instructions for updating the NVR firmware.
Explains how to register the NVR device with the Microdigital CMS software.
Guides on viewing live video streams from connected cameras.
Displays all connected camera channels simultaneously on the screen.
Allows viewing live video from individual camera channels.
Details how to search and play back recorded video data.
Instructions for physically attaching additional hard disk drives.
Steps for formatting a hard disk for system utilization.
