Need help?Do you have a question about the Microelettrica Scientifica MC2-30V and is the answer not in the manual?
Guidelines for storing and transporting the relay, ensuring compliance with environmental conditions.
Instructions for proper installation and electrical connection of the relay, adhering to safety standards.
Precautions for safe handling, maintenance, and protection against electrostatic discharge.
Procedures for detecting faults and guidance on repair, emphasizing manufacturer contact.
Details on the two available power supply types for the relay unit.
Description of the 240x128 pixel hi-resolution LCD display and its information capabilities.
Procedure for manually resetting the signal LEDs via the device's interface.
Information displayed for the last tripped function and stored events.
Steps to configure LED link enable and flashing behavior.
Steps to configure LED function mode and assign specific functions.
Description of parameters for user-defined variables like Name, OpLogic, Timer.
Step-by-step guide for configuring a user variable with specific parameters.
Details on USB (RS232) and RS485 serial communication ports and protocols.
Options for setting language and display backlight preferences.
Information on downloading Journal, Fault log, and Oscillographic files.
Configuration for the First Overvoltage Element (1U>) including variables and operation.
Configuration for the First Undercurrent Element (1U<) including variables and operation.
Configuration for the First Overfrequency Element (1f>) including variables and operation.
Configuration for the First Underfrequency Element (1f<) including variables and operation.
Configuration for the First Frequency Rate of Change Element (1df/dt).
Configuration and operation details for the Trip Circuit Supervision function.
Configuration and operation of the Internal Relay Fault detection element.
Configuration and operation of the Oscillographic Recording function.
Configuration options for Circuit Breaker (C/B) control and management.
Description of variables for external reset configuration, including edge polarity.
Configuration of digital inputs and their role in protection functions.
Examples of configuring digital outputs, including linked functions and timing.
Description of variables related to relay status and local/remote configuration.
General| Brand | Microelettrica Scientifica |
|---|---|
| Model | MC2-30V |
| Category | Relays |
| Language | English |
To Next Page
