Need help?Do you have a question about the Microh LED Quadpar TRI MKII and is the answer not in the manual?
Explains the functions of each pedal: Black Out, Freeze, Sound Active, and Preset selection.
Details how to select colors, adjust dimming intensity, and set flash speed.
Covers selecting built-in programs, jumping speed, and flash speed.
Describes running built-in programs continuously and adjusting speeds.
Instructions for setting the sound sensitivity level for sound-activated operation.
Details how to activate and operate the fixture in slave mode.
Covers selecting DMX addresses and choosing from seven DMX channel modes.
Information on operating the fixture using an optional IR remote control.
Explains requirements for overhead mounting, safety attachments, and qualified technicians.
General| Type | LED Par Can |
|---|---|
| Control Protocol | DMX512 |
| Beam Angle | 25° |
| Power Supply | 100-240VAC, 50/60Hz |
| Color Mixing | RGB |
| Strobe Effect | Yes |
| LED Type | 3W |
| Control Modes | DMX, Auto, Master/Slave, Sound Active |
| Operating Voltage | 100-240VAC, 50/60Hz |
To Next Page
