- 3 -
ADDITIONAL INFORMATION
1. Install the receiver as high as possible for best signal reception and clear of metallic
surfaces.
2. Keep the aerial wire vertical
3. Power the receiver from a regulated DC power supply
PRODUCT SPECIFICATIONS
Microlatch™ REC-14 RF 4-Channel Receiver Controller V1.0
Operating Voltage
9 - 14VDC regulated 1.5A minimum battery backed
supply recommended.
Current consumption @12VDC
5.5mA minimum ( No relays ON)
72mA maximum ( All relays ON)
Physical Dimensions
Case material
85mm (L) x 65mm (W) x 32mm (H)
ABS plastic
Output Channels 4
Output Ratings
SPDT relay 1 Amp switching maximum @ 24VDC
Contacts are voltage free
RF Operating Frequency 434MHz
RF Signal Type (Data Transfer)
On Off Keying (OOK)
Keeloq™ AM ASK Code Hopping
Coding combinations 4.2 billion
Learning capacity 21 devices
Country of Manufacture Australia
Safety
EMC Tested and Approved. CE and C-Tick
Compliance
Complies with AS/NZS 4268:2003, AS/NZS
4251.1:1999
* All specifications subject to change without notice in the interest of ongoing product development
Microlatch™ is a registered trademark of Microlatch Pty Ltd
© 2006 Microlatch™ All rights reserved.
Microlatch Limited
ABN 52 059 640 747
Product Support
support@microlatch.com
Sales
sales@microlatch.com
General Enquires
info@microlatch.com
Website
www.microlatch.com
To Previous Page
Loading...
