Microlife Watch BP 03 - Measurement Interval Programming; Programmable Intervals; Awake and Asleep Hours

EN
11
Programmable measurement intervals
The device automatically takes measurements
at fixed intervals of 15, 20, 30, or 60 minutes, as
programmed by the physician.
15
20
30
60
minutes
Set awake and asleep hours
To better suit each patient’s lifestyle, awake and
asleep hours can be programmed using the provided
WatchBP O3 software. Intervals for the awake and
asleep hours can also be programmed independently.
*
The default measurement interval is 30 minutes for the
awake hours and 60 minutes for the asleep hours.
Awake from with minutes interval06 AM 10 PM 30~
Asleep from with minutes interval10 PM 06 AM 60~
Setting Ambulatory Measurement Schedule