What to do if manometer needle is not at 0 on Microlife BP AG1-30?
If the manometer needle on your Microlife Blood Pressure Monitor is not at 0 ± 3 mmHg at rest, ensure the valve is completely open for a zero check. If the deviation is still more than 3 mmHg, contact your dealer to recalibrate the manometer.
What to do if pressure doesn't rise on Microlife BP AG1-30?
If the pressure isn't rising when pumping the bulb on your Microlife Blood Pressure Monitor, ensure the valve is closed. Verify the cuff is correctly attached to both the bulb and manometer. Check the cuff, tube, and bulb for any leaks. Replace any faulty parts that you find.
Important advice and precautions for performing self-measurement of blood pressure.
Factors that can lead to inaccurate blood pressure readings and how to avoid them.
Detailed instructions on how to correctly position and fit the blood pressure cuff on the arm.
General steps involved in the blood pressure measurement process.
Guidance on the correct procedure for inflating the cuff to the appropriate pressure level.
How to identify and record the systolic blood pressure from the measurement.
How to identify and record the diastolic blood pressure from the measurement.
Recommendation for regular accuracy checks and recalibration of the device.
General| Brand | Microlife |
|---|---|
| Model | BP AG1-30 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
