EasyManua.ls Logo

Microlife BP AG1-30 - Periodical Recalibration; Guarantee Information; Warranty Terms and Conditions

Microlife BP AG1-30
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
•Alwaysdeflatecuffcompletelybeforestorage.
•Donotdismantlemanometerunderanycircumstance.
•Storethewholedeviceinstoragebagprovided,tokeepallthepartsclean.
•Storagetemperaturecondition:20°C to +70 °C at a relative air humidity of 85 % (non-
condensing).
•Wipeoffthemanometerandbulbwithadampcloth.Sterilizationisnotnecessary,sincethe
parts of manometer should not come into direct contact with the patient‘s body during
measurement.
•Removethebladderfirst,andwipethecloser,bladderandtubeswithadampcloth.Thecuffcan
be washed with soap and cold water. But do rinse the cuff with clear water and keep it air dry.
Periodical recalibration
Sensitive measuring devices must from time to time be checked for accuracy. We therefore
recommend a periodical inspection of the static pressure display every year.
Your specialist dealer would be pleased to provide more extensive information about this.
7. Guarantee
This blood pressure monitor is guaranteed for 2 years from date of purchase. This guarantee
includes the instrument and the cuff. The guarantee does not apply to damage caused by
improper handling, accidents, not following the operating instructions or alterations made to the
instrument by third parties.
The guarantee is only valid upon presentation of the guarantee card filled out by the dealer.
Nameandcompanyaddressoftheresponsibledealer:

Other manuals for Microlife BP AG1-30

Related product manuals