Microm HM 325 - PART 1 IMPORTANT INFORMATION; 1-1 Warning signals and symbols; 1-2 Intended use; PART 2 Introduction

Rotary Microtome HM 325
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf 387821 - English
Table of contents
EC certificate of conformity
PART 1 IMPORTANT INFORMATION
1-1 Warning signals and symbols
1-2 Intended use
PART 2 Introduction
2-1 Description Rotary Microtome HM 325
2-2 Accessories
2-2-1 Standard equipment
2-2-2 Additional equipment (optional)
2-3 Technical data Rotary Microtome HM 325
PART 3 OPERATING INSTRUCTIONS
3-1 Setting up the microtome
3-2 Cutting movement and retraction
3-3 Locking and unlocking the handwheel
3.4 Section thickness setting
3-5 Section counter
3-6 Specimen feed
3-6-1 Trimming and first cuts
3-6-3 Fine feed
3-7 Acoustic signal for the front end position of the specimen movement
3-8 Adapters for specimen clamping
3-8-1 Adapter, non-orienting
3-8-2 Adapter, orienting, specimen orientation
3-8-3 Clamping and/or changing specimen clamps
3-8-4 Readjusting specimen clamps