LT-6773 Rev 0 February 2024 1
TX3 Cloud Gateway Installation Manual
TX3 Cloud Gateway Installation
Manual
The TX3 Cloud Gateway connects a TX3 system to the TX3 Vision Configurator as shown
below.
1. Installation
1.1. Items Required
• TX3 Vision Cloud Gateway unit (TX3-CLOUD-GATEWAY)
• Power Adapter (included with TX3 Vision Cloud Gateway unit)
• Ethernet cable
1.2. Preparation
1. Connect the Ethernet cable to LAN port 1 of the unit, ensuring it is connected to the
internet.
TX3 Vision
Internet
Router
TX3 Cloud
Gateway
2
ABC
3
DEF
1
5
JKL
6
MNO
4
GHI
8
TUV
9
WXYZ
7
PQRS
0
*
#
Ethernet
Card access
controller
2 card reader
Elevator
Restriction Unit
Lobby Control Unit
Card access
controller
1 card reader
EXISTING TX3
NETWORK
RS-485 Network
Ethernet
To Next Page
Need help?
General