Need help?Do you have a question about the MicroMetl ECD-SRT34SA-DWES and is the answer not in the manual?
General| Brand | MicroMetl |
|---|---|
| Model | ECD-SRT34SA-DWES |
| Category | Industrial Equipment |
| Language | English |
Sheet metal parts may have sharp edges or burrs. Use care and wear protective clothing.
Failure to follow this warning could cause personal injury or death. Disconnect power.
Steps for disconnecting power, removing access panels before installation.
Instructions for assembling the hood, installing the damper assembly, and securing the unit.
Guidance on relocating the outside air sensor and installing the supply air temperature sensor.
Determine control mode based on required sensors; kits include SAT, lockout switches, and OA sensors.
Economizer adjusts dampers based on a fixed 70°F outdoor air temperature setpoint for free cooling.
Economizer adjusts dampers based on a selectable outdoor temperature setpoint for free cooling.
Steps to set up DCV by adjusting minimum/maximum damper and CO2 setpoints for IAQ.
To Next Page