ENGLISH
Contact information
Micropower E.D. Marketing AB
Idavägen 1, SE-352 46 Växjö, Sweden
Phone: +46 (0)470-727400
e-mail: support@micropower.se
www.micropower-group.com
Indicator status on the Control panel
Off
On
Flashing
Red Yellow Green Information
Only mains indicator is lit. Charger is waiting for a battery to be connected.
The charging process has been manually stopped. Press STOP to resume charging.
A battery is connected to the charger and a charging is in progress.
Equalize charging in process.
A battery is connected to the charger and the charging process is completed.
A battery is connected to the charger but charging is restricted. The restriction can be
due to settings in the Time restriction, Remote in function or during a BMU
initialization.
An alarm is active, no specific.
Alarm, low battery voltage.
Alarm, high battery voltage.
Alarm, time limit exceeded.
Alarm, Ah limit exceeded.
Alarm, invalid charging parameters.
Alarm, high charger temperature.
Alarm, low charger temperature or sensor fault.
Alarm, regulation fault.
Alarm, battery error.
7
To Next Page
Loading...
