2.5. Weather station support
APRS Voyager allows you to receive weather data from compatible weather
stations over RS-232 serial interface. Currently supported stations are:
• LaCrosse/Technoline WS-2300,
• LaCrosse/Technoline WS-2350,
• Peet Bros Ultimeter 100,
• Peet Bros Ultimeter 800,
• Peet Bros Ultimeter 2000,
• Peet Bros Ultimeter 2100,
• Davis Vantage Pro (with RS-232 datalogger),
• Davis Vantage Pro2 (with RS-232 datalogger),
• Davis Vantage Pro Plus (with RS-232 datalogger),
• Davis Vantage Pro2 Plus (with RS-232 datalogger),
2.6. External telemetry module support
You can use an additional telemetry module for reporting of voltages and electric
current values of your installation. This is especially useful for monitoring of solar panel
powered systems on remote sites. WXTelemetry module allows you to read 2 voltages, 2
currents and one temperature, then sends these values as APRS telemetry reports to RF.
2.7. Digital thermometer support
If you do not need a telemetry module connected to RS-485 serial bus, then you
can use it for direct connection of DS18B20 or DS18S20 thermometer input. Measured
temperature can then be sent in beacon text or telemetry reports.
5
To Next Page