Microsemi Power Injectors
Installation Instructions
PWR-INJ60GO/AC-NA
(AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=)
This document describes the Microsemi Access Point Power Injector PWR-INJ60GO/AC-NA
(AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=, referred to as the power injector in this
document) and provides instructions for mounting them.
The following information is provided in this document:
•
Product Overview, page 2
•
PWR-INJ60GO/AC-NA= Technical Specifications, page 3
•
Important Safety Information, page 4
•
Connectors on the Power Injector, page 6
•
Unpacking the Power Injector, page 7
•
Mounting the Power Injector on a Wall, page 8
•
Pole Mounting the Power Injector Using AIR-PWRINJ-60-PMK=, page 9
•
Connecting Data and Power to the Injector, page 11
•
Power Injector Input and Output Connections, page 13
To Next Page
Need help?
General
