Microsensor MPM Series - Outline Construction

4
Secondary screen: 0.36” (460 series,484ZL series)
Display range: -1999~9999 (red highlight LED)
Digital part: sampling rate:10 times/s
Relay qty.:1~5 (484C series,484ZL series) 1~8(460 series)
Installation method: vertical and Horizontal
mounting (MPM484ZL, MPM484C), submersible
Protection: IP65:MPM460(W) and MDM460 display housing
IP68:MPM460W sensor
4. Outline construction
4.1. Construction material
Pressure port: stainless steel
Diaphragm: 316L stainless steel
Electric housing: stainless steel(484C, 484zl front shell)
aluminium alloy (460,484zl bottom shell)
Seal method: NBR, full-welded
4.2. Pressure port
Standard gauge: M20x1.5 male .etc
Standard differential pressure: G1/4 female
Standard level(460W): sensor part is submersible transducer
4.3. Outline
a) MPM/MDM484C series