To get started, you’ll need to wake
your Microsoft Band by connecting
it to a standard USB port.
*USB power adapter not included.
Getting Started
To wake your band and
begin charging:
Connect the magnetic end of
the USB charging cable to the
charging port on your band.
Clean the charging contacts
with a dry cloth before each
future charge to prevent
corrosion and skin irritation.
Connect the USB end of the
cable to a standard USB port
or USB power adapter. Only
use standard USB AC power
adapters with your band.*
Your band’s screen should
activate automatically.
1
2
3
X195899102QSG.indd 2 10/16/2014 10:56:54 PM
To Next Page
Loading...
