Microsoft Surface Dial User Manual

Bluetooth
Customize your Surface Dial
1. Complete set up (above).
2. On your Surface, open the Start menu and select Settings.
3. Select System > About. Ensure your Surface is running Windows version
1607 or higher.
4. Return to Settings. Select Devices > Wheel.
5. Select desired options from the drop down menus to add shortcuts to
your custom tool.
Set up your Surface Dial
1. Make sure your Surface is powered on.
2. Open the Start menu and select Settings.
3. Select Devices > Bluetooth. Turn Bluetooth On.
4. On your Surface Dial, pull the bottom to open the battery compartment.
Ensure there are two AAA batteries installed.
5. Remove the battery tab from the underside of your Surface Dial.
6. Press and hold the button by the batteries until the LED flashes to turn
on Bluetooth pairing mode. The LED is located opposite the button on
the other side of the batteries.
7. Select Surface Dial in the list of Bluetooth
devices in Settings, then select Pair.
8. Remove the protective film from your
Surface Dial. It is ready to be used.

Microsoft Surface Dial Specifications

General

Connectivity	Bluetooth 4.0 LE
Haptics	Haptic feedback
Colors	Silver
Type	Input device
Compatibility	Surface Pro, Surface Laptop, Surface Book 2, Surface Studio, Surface Studio 2, Surface Pro 4, Surface Book, Surface Go
Weight	145 g
Battery	2 AAA alkaline batteries
Battery Life	Up to 12 months
Surface Dial on-screen experience	Available on Surface Studio, Surface Pro, Surface Book 2, and Surface Go
Surface Dial off-screen experience	Yes
Buttons	1 click button
Rotation	360-degree rotation