Microsoft Xbox 360 Wireless Networking Adapter - Set Up Adapter Away From Console

english
5
Note
The antennas are designed to swivel
on only one axis. Do not swivel the
antennas in any direction other than
parallel with the adapter.
Do Not Use to Lift Console
Do not use the Xbox 360 Wireless
Networking Adapter or its antennas
to lift the console. They could break
and the console could fall.
SET UP THE ADAPTER AWAY
FROM YOUR CONSOLE
Radio interference from nearby
devices can cause network
connectivity problems when the
adapter is attached to the console.
In this case, connectivity might be
improved if you set up the adapter
away from the console using a USB
extension cable (sold separately).
To set up the adapter away from
your console:
1 Flip up both antennas.
2 Swivel both adapter feet out at a
right angle to the adapter.