Need help?Do you have a question about the microSYST miline S1X4 and is the answer not in the manual?
General| Aspect Ratio | 16:9 |
|---|---|
| Brightness | 250 cd/m² |
| Refresh Rate | 60 Hz |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 178° (H) / 178° (V) |
| Connectivity | VGA, HDMI |
| Input Ports | VGA, HDMI |
| Power Consumption | 25 W |
Specifies safety precautions for repair, component exchange, and device opening, requiring authorized personnel.
Highlights the importance of safe and reliable installation, requiring user verification of mounting materials and local conditions.
Provides pin assignments for various connectors like AD converter, Clock, Ethernet, Digital IO, Pulse counter, Profibus, Profinet, RS485, and Timer.
Explains how to change the display's IP address via the 'Display | Configure interface' menu.
Introduces configuring the control board and additional components (MPB) using the MKS 2.x software.
Details configuring the control board's name, brightness, digital I/O settings, and master/slave modes.
Explains configuration for voltage and current channels, including resolution, averaging, and threshold values.
Describes various operating modes for the pulse counter, including Pulse counter, Pulse interval, Pulses per time, and Interval counter.
Covers setting the Profibus DP slave address, configuring data parts, and inserting/managing data.
Details PROFIenergy settings and project engineering for the microSYST MPB Profinet interface in Siemens TIA portal.
Details telegrams for reading, writing, and incrementing/decrementing integer values in the display.
Covers telegrams for reading and writing string values, including response structure and examples.
To Next Page
