10
Safety precautions for power supply and battery
Use the correct external power source.
The power adapter of this product can only be used with
the type of power source indicated on the electrical ratings
label. If you are not sure of the type of power source
required please contact an authorized Microtech support
center.
Battery pack care
The product contains a lithium polymer battery. The
misuse of the battery pack can result in the risk of re or
burns. Do not attempt to open or x the battery pack.
Device charging
Make sure to fully charge your e-tab before using it in
battery mode for extended periods. Remember that the
power adapter charges the battery during the whole time
in which it is connected to an AC power source. Keep in
mind that it takes much longer to charge the battery when
e-tab is powered on.
Do not leave e-tab connected to the power source when
the battery is fully charged.
e-tab is designed to remain connected to an electrical
source for long periods of time.
To Next Page
Loading...
