SAFETY INSTRUCTIONS
Always connect the inverter to a two pole, three-wire grounding mains socket. The socket must be connected to appropriate branch
protection (fuse/circuit-breaker). Connection to any other type of socket may result in a shock hazard.
To switch off the inverter output in emergency, use switch on the Front panel. Also disconnect the mains cord and battery wires.
Avoid installing the inverter in open, excessively humid place or where there is water. Care must be taken to ensure that the inverter is
kept away from heat-emitting appliances such as a heater, blower, oven etc. The unit must also be placed in a manner that it avoids
exposure to sunlight. The place of installation should be well-ventilated and easily accessible for servicing.
Foreign objects and water must not enter the inverter. Always ensure that objects containing liquid are avoided near the unit.
In the event of any instrument requiring service at our authorised service centre, the following procedure should be adopted.
1. The instrument must be securely packed, preferably in its original packing.
2. The instrument should be despatched on Freight-prepaid basis duly insured.
3. One of our Service / Sales Executive should be informed of the goods Receipt No. and date of despatch along
with the name of carrier.
4. The above procedure should only be adopted on the advise of one of our Service / Sales Executive or Dealer.
5. We reserve the right to charge the consignee for any damage incurred during transit.
1. Must put the inverter ON/OFF Switch in OFF Position.
2. Mains Input should remain connected to keep the battery always in charged condition.
IMPORTANT
GOING ON VACATIONS
14
To Next Page
Loading...
