Microtel 100 Dialer Series - User Manual

Microtel Series 100 Dialer
Installation and Operation Manual
P/N 310161 Rev B
CAUTION: Do not ship product with battery installed.
Proprietary Notice: This document and the subject matter hereto are the
property of MICROTEL, Inc. and shall not be reproduced or copied or
used for the purpose of manufacturing or sale of apparatus, except by
written permission of MICROTEL, Inc.
MICROTEL
206 West Judge Perez Drive
Chalmette, Louisiana 70043
Phone: 504/276-0571
Fax: 504/276-0574
http://www.Microtel-Inc.Com
e-mail: Microtel2@AOL.Com

Summary

Introduction

Physical System Installation

Guidance on mounting the unit, including recommended height and port connections.

Battery Installation

Instructions for correctly installing the system's backup battery, including lead connections.

Electrical Power Installation

Details on connecting the system to a grounded 120 VAC outlet and using circuit breakers.

Telephone Line Installation

Information on connecting to the telephone network and FCC registration requirements.

Fault Monitoring Interface Connections

How to connect fault sensing lines and configure input channels (NO/NC).

Powering Up the System

Programming the Dialer System

Telephone Numbers

Operational Parameters

Operations

Putting the System in Run

Receiving an Alarm

How the system handles alarms, places calls, and manages acknowledgements.

Test and Advanced Keystroke Sequences

Microtel 100 Dialer Series Specifications

General

Brand	Microtel
Model	100 Dialer Series
Category	Cell Phone
Language	English