Need help?Do you have a question about the MicroTim XB and is the answer not in the manual?
General| Category | Weather Station |
|---|---|
| Model | MicroTim XB |
| Measurement Parameters | Temperature, Humidity, Barometric Pressure |
| Display | LCD |
| Humidity Range | 0% to 100% |
| Dimensions | 120 mm x 80 mm x 30 mm |
| Weight | 150 g |
| Temperature Range | -40°C to +60°C (-40°F to +140°F) |
Configures display for ASL, AGL, or both altitudes.
Sets altitude and pressure units (feet/inHg, meters/kPa, mbar/feet).
Resets the device to its original factory configuration.
Illustrates Above Sea Level (ASL) altitude readings.
Illustrates Altitude Above Ground Level (AGL) readings.
Procedure to switch the device into barometer mode.
Steps to calibrate the barometer using elevation or pressure.
How to read and operate the device in barometer mode.
Procedure to switch the device into VSI mode.
How to read and interpret Vertical Speed Indicator readings.
Procedure to switch the device into accumulator mode.
How to view logged vertical distances climbed and descended.
To Next Page