Installation and user manual HP 900/1100/1500 BLACK Inverter
Version: 01/2022 Page 4
Ideal water temperature for external pools is considered at levels from 27° to 32°C. This may change based on
particular demands of the user. When setting the desired air temperature higher than 32°C please review the
material characteristics of your pool parts. High water temperature can damage these materials and contribute
to creation of algae. Manufacturer, distributor and reseller do not bear responsibility resulting from
inappropriate heat pump usage.
1.2 Package checking
The unit was delivered in carton box on a wooden palette. Do not accept the package if it shows
signs of damage. If the package appears intact, please unpack the unit and check the content. It
should include the following:
1. The heat pump – condensing unit, the heat exchanger.
2. This Installation and user manual
3. Four rubber silent blocks
1.3 Waste disposal information
When using this heat pump in the European countries, the following information must be
followed:
DISPOSAL: Do not dispose this product as unsorted municipal waste. It is prohibited to
dispose this heat pump in domestic / household waste. It is prohibited to dispose this
appliance into forests or natural landscape. This could lead into local soil pollution. Collection
of such waste must be treated individually.
DISPOSAL POSSIBILITIES:
1. The municipality has established a collection system where electronic waste can be disposed.
2. When buying a new product, the retailer or the manufacturer may take back the
old appliance free of charge.
3. Old appliance may contain valuable resources which could be sold to scrap
material dealers.
4. Disposal of packaging materials such as carton box or plastic / bubble foil can be
recycled.
To Next Page
