Mid-tech TASC-6100 - Page 41

2-25
98-05018
R2
CE & StandardVersion
TASC 6100
Setup
& Cal.
B. Select the desired time using the INC/DEC switch.
C. Exit this set-up mode by moving the Display
Selector to another position, the Mode Selector
to OPERATE, or turning the console OFF and
back ON.
NOTE: The “Auto Power Down Feature is only available
on the CE version of the console (CE designation label
on back of console). If you have the standard console
model always turn the console power off when not in use
to prevent unnecessary drain on the battery.
M
id-
T
Mid-T
ech
ech