Need help?Do you have a question about the Middle Atlantic Products UPS-IPCARD and is the answer not in the manual?
General| Type | Network Card |
|---|---|
| Manufacturer | Middle Atlantic Products |
| Model | UPS-IPCARD |
| Functionality | Remote UPS monitoring and control |
| Connectivity | Ethernet |
| Compatibility | Compatible with Middle Atlantic UPS systems |
Step-by-step guide for physically installing the Network Interface Card into the UPS.
Instructions on how to configure the IP address for the Network Interface Card using utility tools.
Manages UPS operations like rebooting, standby mode, and sleep mode with configurable delays.
Instructions for performing and interpreting UPS battery tests.
Guide for synchronizing runtime estimates by calibrating UPS batteries.
Manages administrator and guest user accounts, including password changes and access.
Sets the timeout period in minutes before automatic user logout.
Sets up TCP/IP settings, including DHCP enablement and manual IP configuration.
Enables SNMP service and configures access control based on community name, IP, and access type.
Detailed steps to reset the Network Interface Card to its factory default settings.
Ensures the UPS-IPCARD is installed and powered on for firmware upgrade.
Details the steps for updating firmware files using FTP and command prompt.
Procedure to update the 'mapsnmpfw_xxx.bin' firmware file via FTP.
Procedure to update the 'mapsnmpdata_xxx.bin' firmware file via FTP.
Troubleshooting steps for configuring the Management Card via methods 1 or 2.
Procedure to recover forgotten user name or password.
To Next Page
