To Next PageTo Next PageWhat to do if my Middle Atlantic Products OL1500R shows O/P Overload?
If your Middle Atlantic Products UPS indicates an O/P Overload, it means your equipment is drawing more power than the UPS can supply. Try turning off non-essential equipment. If this resolves the issue, the UPS will return to normal operation.
How to fix a Wiring Fault on my Middle Atlantic Products OL1500R?
A Wiring Fault on your Middle Atlantic Products UPS indicates a problem with the electrical wiring. There are several potential causes: * The line and neutral wires might be reversed. * A ground wire might be missing. * There might be no ground wire. To resolve this: * If the line and neutral wires are reversed, have a qualified electrician exchange them. * If a ground wire is missing, have a qualified electrician connect one. * If there is no ground wire, you can disable the Wiring Fault alarm on the LCD panel.
Why is my Middle Atlantic Products UPS showing Over Temperature?
The 'Over Temperature' warning on your Middle Atlantic Products UPS means the high-temperature sensor has activated its protection mechanism. Check if the fan is working correctly and ensure that the ventilation holes are not blocked.
What does BAT Disconnected mean on my Middle Atlantic Products OL1500R?
The 'BAT Disconnected' message on your Middle Atlantic Products UPS indicates a missing battery power. Check the battery connector and the battery breaker to ensure they are properly connected.
What to do for a Battery Failure on my Middle Atlantic Products UPS?
If your Middle Atlantic Products UPS reports a Battery Failure, it means the UPS has failed a battery test. First, check the battery connector and battery breaker.
What does Line Abnormal mean on my Middle Atlantic Products OL1500R UPS?
The 'Line Abnormal' message on your Middle Atlantic Products UPS indicates that the utility power backed up during the UPS auto-restart is incorrect. Verify that the voltage or frequency of the utility power is within the acceptable range.
What should I do if my Middle Atlantic Products UPS displays 'Load Over XXX%'?
If your Middle Atlantic Products UPS shows 'Load Over XXX%', it means your connected equipment is demanding more power than the limit set in the Middle Atlantic Power Manager Software. You can either turn off non-essential equipment or increase the load level allowed in the Power Management Software.
When should I replace the battery in my Middle Atlantic Products UPS?
The 'Replace Battery' message on your Middle Atlantic Products UPS indicates that the battery will soon need replacement due to insufficient runtime.
What to do if my Middle Atlantic Products OL1500R shows Output Short?
If your Middle Atlantic Products UPS displays 'Output Short,' it indicates a short circuit in the output. This may be due to problems with your connected equipment. Disconnect the equipment and check again.
What does EPO OFF mean on my Middle Atlantic Products OL1500R?
The 'EPO OFF' message on your Middle Atlantic Products UPS indicates a missing EPO (Emergency Power Off) connection. Check the EPO connection to ensure it is properly connected.
General| Brand | Middle Atlantic Products |
|---|---|
| Model | UPS-OL1500R |
| Category | UPS |
| Language | English |
